Al Summan Metals, a well-regarded manufacturer and supplier based in Dubai, UAE, focuses on producing high-quality Hastelloy N Bars and Rods. These products are skillfully made to deliver exceptional corrosion resistance and mechanical strength, even in the toughest chemical environments. Built to resist stress-corrosion cracking, pitting, and oxidation under both reducing and oxidizing conditions, they are ideal for use in chemical processing, marine, and aerospace industries. Al Summan Metals takes pride in precision manufacturing, guaranteeing superb dimensional accuracy and compliance with international standards, which yields Hastelloy N Bars and Rods that provide dependable performance, durability, and a long service life in demanding industrial applications.
Hastelloy N Bars and Rods are made up mainly of nickel, molybdenum, and iron, together with small quantities of chromium, cobalt, and manganese. This distinctive combination gives them outstanding resistance to chloride-induced corrosion, as well as to both oxidizing and reducing chemicals, even under high-temperature conditions. In terms of mechanical properties, they offer a tensile strength of roughly 690 MPa and a yield strength of about 275 MPa, along with excellent ductility, toughness, and creep resistance. This precise balance of alloys guarantees stability and reliable performance, even in extreme operating environments.
| Standards : | ASTM B573, ASME SB573 |
| Dimensions : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Wire : | Thickness starting from 0.05mm |
| Round bar size : | Diameter: 3-~800mm |
| Hex Bar size : | 2-100mm A/F |
| Flat bar size : | Thickness: 2 -100mm / Width: 10 to 500mm |
| Square bar size : | 4 to 100mm |
| Rectangular Bars Size : | 33 x 30mm to 295 x 1066mm |
| Hollow Bar : | 32mm OD x 16mm ID to 250mm OD x 200mm ID |
| Tolerance : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Grade | C | Mn | Si | Cu | Ni | Cr | Mo | W | Fe |
| Hastelloy N | 0.06 max | 0.8 max | 1.00 max | ≤ 0.35 | 71 Balance | 6.0 – 8.0 | 15.0 – 18.0 | ≤ 0.50 | ≤ 5 |
| Tensile Strength | Modulus of elasticity (@14°C) | Elongation |
| Psi – 800 , MPa –116000 | Psi – 219 , Ksi – 31800 | 39.3 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Hastelloy N | – | N10003 |
Yes, Hastelloy N rods are weldable with conventional welding methods, such as TIG and MIG welding. To achieve the best outcomes, preheating and post-weld heat treatment might be necessary.
Hastelloy N rods can be obtained in a range of dimensions, generally spanning 1/8" to 3" in diameter. They are supplied with finishes like cold drawn, bright annealed, or polished, based on the intended use.
Hastelloy N bars deliver outstanding resistance to corrosion, especially in high-temperature settings. They also demonstrate superb strength, thermal stability, and resistance to oxidation and carburization.
Hastelloy N Bars and Rods are used across a range of industries requiring materials that can withstand aggressive chemical and thermal conditions. They are especially suitable for building reactors, piping systems, heat exchangers, pumps, valves, and chemical processing equipment. Beyond that, these bars and rods serve in pollution control systems, marine hardware, and aerospace components, where resistance to strong acids and chlorides is critical. Thanks to their outstanding weldability, machinability, and lasting durability, Hastelloy N Bars and Rods emerge as a reliable option for demanding industrial and engineering applications.
We deliver products accompanied by mill test certificates as well as third-party test certificates, guaranteeing the highest levels of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
