Al Summan Metals, a well-regarded manufacturer and supplier based in Dubai, UAE, is committed to producing premium-quality Nickel Alloy 201 Bars and Rods. These products are renowned for their exceptional corrosion resistance, strength, and ductility. Through the use of advanced manufacturing methods and stringent quality control practices, Al Summan Metals ensures that every Nickel Alloy 201 Bar or Rod complies with international standards, delivering reliable performance even in demanding industrial environments. Recognized for their capacity to resist reducing agents, chemical corrosion, and elevated temperatures, these bars and rods are ideal for sectors such as chemical, petrochemical, marine, and power generation. Al Summan Metals provides precision-engineered nickel alloy solutions that combine durability, toughness, and lasting efficiency.
Nickel Alloy 201 Bars and Rods consist of over 99% nickel, together with small quantities of copper, iron, manganese, and carbon. This distinctive makeup gives them remarkable mechanical strength, ductility, and corrosion resistance in reducing and mildly corrosive conditions. When it comes to mechanical properties, Nickel Alloy 201 features a tensile strength spanning 450 to 700 MPa, yield strength from 200 to 400 MPa, and an elongation of 40 to 50%. The material additionally demonstrates outstanding thermal conductivity, fatigue resistance, and workability, which makes it perfectly suited for high-performance uses in industrial and chemical processing environments.
| Grade | Nickel 201 |
|---|---|
| Specification | UNS N02201, ASME SB160/ASTM B160 |
| Round bar size | Dia: 3mm~800mm |
| Hollow Bar | 32 OD x 16 ID to 250 OD x 200 ID |
| Square bar size | 4mm to 100mm |
| Hex Bar size | 2mm to 100mm A/F |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Billet Size | 1/2″ to 495mm Diameter |
| Channel Bar | 80 x 40 to 150 x 75mm section; 5 to 6mm thickness |
| Flat bar size | Thickness: 2mm to 100mm |
| Width: 10mm to 500mm | |
| Hollow Bar | 32mm Outside Diameter x 16mm Inside Diameter to 250mm Outside Diameter x 200mm Inside Diameter) |
| Angle bar size | 3*20*20~12*100*100 |
| Form | Rings, Hollow, Flat Bar, Rectangle, Triangle, Square,Rod, Half Round Bar, T-Bar, Hex (A/F), Precision Ground Bar, Round, Channel Bar, Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Tolerance | H8, K12, H10, H11, K10, H9, K11, K9, H12, H13, or custom |
| Technique | Forged Round Bar, Rod, Hot Rolled, Cold Drawn, Cold Rolled, |
| Condition | annealed, Hardened and tempered |
| Surface | Polished, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Bright, Hairline |
|
Grade |
Fe |
Si |
C |
S |
Ni |
Mn |
Mg |
Cu |
Ti |
|---|---|---|---|---|---|---|---|---|---|
|
Nickel 201 |
0.4 max |
0.2 max |
0.02 max |
0.01 max |
99.0 min |
0.35 max |
0.15 max |
0.25 max |
0.1 max |
|
Density |
Elongation |
Tensile Strength |
Melting Point |
Yield Strength (0.2%Offset) |
|---|---|---|---|---|
|
8.9 g/cm3 |
45 % |
Psi – 67000 , MPa – 462 |
1446 °C (2635 °F) |
Psi – 21500 , MPa – 148 |
|
STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
GOST |
BS |
JIS |
EN |
|---|---|---|---|---|---|---|---|
|
Nickel 201 |
N02201 |
2.4068 |
– |
НП-2 |
NA 12 |
NW 2201 |
NLC-Ni 99 |
Type | SIZES (Inches) | ISO Tolerance | SIZES (mm) |
|---|---|---|---|
Peeled and Polished | 1.50″ to 6.00″ | h11-DIN 1013 | 40.00 to 150.00 |
Cold Drawn and Ground | 5/6″ to 2.50″ | h9-h8-h11-h10 | 10.00 to 75.00 |
Cold Drawn and Polish | 1/8″ to 3.00″ | h9-h8-h11-h10 | 3.00 to 75.00 |
Peeled and Ground | 3/4″ to 2.00″ | h10-h9-h11 | 20.00 to 50.00 |
Cut to size on request (tolerance +2/-0 mm).
50.0 | 6.0 |
45.0 | 5.0 |
60.0 | 8.0 |
55.0 | 7.0 |
70.0 | 10.0 |
65.0 | 9.0 |
75.0 | 12.0 |
90.0 | 20.0 |
80.0 | 16.0 |
100.0 | 25.0 |
160.0 | 35.0 |
130.0 | 30.0 |
200.0 | 40.0 |
Yes, Nickel Alloy 201 rods are weldable through a range of welding methods, such as TIG and MIG welding.
Nickel Alloy 201 bars demonstrate superb corrosion resistance, elevated thermal conductivity, sound mechanical properties, and remarkable weldability, particularly within reducing environments.
Nickel Alloy 201 rods can be obtained in a range of sizes, generally from 1/8" to 3" in diameter, and are offered in finishes including bright, polished, and cold drawn.
Nickel Alloy 201 Bars and Rods are widely applied across chemical, petrochemical, marine, and industrial sectors, owing to their excellent corrosion resistance, strength, and durability. They are frequently employed in heat exchangers, chemical processing equipment, fasteners, shafts, pumps, valves, and structural components subjected to reducing chemicals and moderately corrosive environments. Furthermore, they serve a crucial function in aerospace, power generation, and offshore platforms where dependability, performance, and long life are essential. Nickel Alloy 201 Bars and Rods deliver high-performance, precision, and lasting service for challenging industrial and engineering applications.
We supply products accompanied by both mill test certificates and third-party test certificates, guaranteeing the highest standards of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
